Configuring IP Client Tracker on AOS-Switches

The IP Client tracker module identifies both trusted and untrusted clients that access the system. This feature is available for AOS-Switch 2930F, 2930M, and 3810 switches.

To configure IP client tracker, complete the following steps:

1. In the Network Operations app, select one of the following options:
   • To select a switch group in the filter:
     1. Set the filter to a group containing at least one switch.
        

        The dashboard context for the group is displayed.

     2. Under Manage, click Devices > Switches.
     3. Click the AOS-S or Config icon to view the switch configuration dashboard.
   • To select a switch in the filter:
     1. Set the filter to Global or a group containing at least one switch.
     2. Under Manage, click Devices > Switches.
        

        A list of switches is displayed in the List view.

     3. Click a switch under Device Name.
        

        The dashboard context for the switch is displayed.

     4. Under Manage, click Device.
        

        The tabs to configure the switch is displayed.

2. Click System > IP Client Tracker. The IP Client Tracker page is displayed.
3. To enable the client tracker move the IP Client Tracker toggle to on position.

4. Select any one of the following option under Enable IP Client Tracker for:
   • All clients
   • Trusted clients only
   • Untrusted clients only
5. Move the Probe Delay toggle to on position.
6. Enter the Enter probe delay in seconds. Default value is 15, you can set a value in the range of 15 to 300 seconds.
7. Click Save Settings.