Intra VLAN Traffic Whitelist
The Intra VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. Traffic Whitelist is a global whitelist for all WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. SSIDsService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. and wired networks configured with the feature. For servers to serve the network, you must add them to the Intra VLAN Traffic Whitelist using their IP or MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address. When you configure wired servers with their IP address or MAC address, the Instant Access Point allows client traffic to the destination MAC addresses.
Configuring a Wired Server with the IP Address
To configure a wired server with the IP address, complete the following steps:
1. In the app, set the filter to a group that contains at least one AP.
The dashboard context for the group is displayed.
2. Under , click > .
3. Click the icon.
The tabs to configure access points are displayed.
4. Click , and click the tab.
The Security details page is displayed.
5. Click the accordion.
6. In the window, click and enter the IP address of the server.
7. Click OK.
8. Click .
To edit a wired server, select the IP address of the wired server in the window, and then click the edit icon.
To delete a wired server, select the IP address of the wired server in the window, and then click the delete icon.
Configuring a Wired Server with the MAC Address
To configure a wired server with the MAC address, complete the following steps:
1. In the app, set the filter to a group that contains at least one AP.
The dashboard context for the group is displayed.
2. Under , click .
3. Click the icon.
The tabs to configure access points are displayed.
4. Click , and click the tab.
The Security details page is displayed.
5. Click the accordion.
6. In the window, click and enter the MAC address of the server.
7. Click OK.
8. Click .
To edit a wired server, select the IP address of the wired server in the window, and then click the edit icon.
To delete a wired server, select the IP address of the wired server in the window, and then click the delete icon.
