• Home
  • Support
  • Terminology Change
  • PDFs
  • All Files
  • All Files
  • Configuring Access Points
    • Provisioning APs
    • Configuring APs Using Templates
    • Viewing APs Configuration Tabs
    • Configuring Device Parameters
    • Configuring Network Profiles on Instant APs
    • Configuring ARM and RF Parameters on APs
    • Configuring IDS Parameters on APs
    • Configuring Time-Based Services for Wireless Network Profiles
    • Configuring Authentication and Security Profiles on Instant APs
    • Denylisting Instant AP Clients
    • Configuring Instant APs for VPN Services
      • Configuring Instant APs for VPN Tunnel Creation
      • Configuring Routing Profiles for Instant AP VPN
    • Configuring DHCP Pools and Client IP Assignment Modes on Instant APs
    • Configuring Services
    • Configuring Uplink Interfaces on Instant APs
    • Configuring Enterprise Domains
    • Configuring SNMP Parameters
    • Mobility and Client Management
    • Renaming an AP
Aruba Central Online Help
topic rating
topic rating
topic rating
topic rating
topic rating
You are here: Home > Managing Access Points > Configuring Access Points > Configuring Instant Access Points for VPN Services

Configuring IAPs for VPN Services

This section describes the following VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. configuration procedures:

  • IAP VPN Overview
  • Configuring IAPs for VPN Tunnel Creation
  • Configuring Routing Profiles for IAP VPN
Send Feedback

© Copyright 2021 Hewlett Packard Enterprise Development. All Rights Reserved.