All Clients

The Clients page provides a summary view of all the clients connected to the network. You can filter clients based on the network the clients are connected to. The page displays key client information and also allows you to view a specific client detail page.

By default, the Clients page displays a unified list of clients for the selected group. The list of clients is populated for a time range of 3 hours. To view the list of clients for a different time range, click the Time Range Filter link and select the required time period. Total data usage for the selected time period is displayed above the client summary bar.

To filter clients based on the device to which the clients are connected, select the device type from the Clients drop-down list:

Unified—Displays a unified list of clients connected to the network.

AP—Displays a list of clients connected to the Instant AP.

Switch—Displays a list of clients connected to the switch.

Controller—Displays a list of clients connected to the Aruba Controller.

The wired client will show up in the Unified Clients page only if the client is connected to an Aruba 2540 Series, Aruba 2920 Series, Aruba 2930F Series, Aruba 2930M Series, Aruba 3810 Series, or Aruba 5400R Series switch.

To filter clients based on the network to which the clients are connected, click the network type from the Client Summary bar:

Wireless—Displays a list of clients connected to the wireless network.

Wired—Displays a list of clients connected to the wired network.

The Clients table lists the details of each client. By default, the table displays the following columns: Client Name, Status, IP Address, Connected To, VLAN, ,Link, AP Role, Controller Role, and Health. Click the ellipsis icon to perform additional operations:

Download CSV—Downloads the client details in the .csv file format.

Select All—Selects all columns.

Reset Columns—Resets the table view to the default columns.

If a filter icon appears next to the column header, click it and enter the filter criteria or select a filter criteria. For example, in the Client Name column, enter the name of the client and in the Status column, select from one of the predefined filter criteria: Connected, Offline, or Failed.

Table 1: Unified Client Details
Column	Applicability	Description
Client Name	Unified AP Switch Controller	Username, hostname, or MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the client. Click the client name to view the client details page.
Status	Unified AP Switch	Client connection status. Use the filter option to view the following: Connected clients Offline clients Failed clients. Hover your mouse over the status to view: Client name IP address Connected—Date and time at which the client connected. Offline—Last seen time. Failed—Failure reason and last seen time.
IP Address	Unified AP Switch	IP address of the client.
VLAN	Unified AP Switch Controller	VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. of the device to which the client is connected.
Connected To	Unified	AP name, Switch name, or Controller name. This is the first layer 2 hop for the client. If the device does not have a name, the MAC address is displayed.
Link	Unified	Displays SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. for wireless clients and port number for wired clients.
AP Role	Unified AP	Role assigned by the Instant AP.
Controller Role	Unified Controller	Role assigned by the Aruba Controller.
Health	Unified AP Controller	Client health. The value can be one of the following: Good—71-100. Fair—31-70. Poor—0-30.
Group Name	Unified AP Switch Controller	Group name of the device managed by Aruba Central.
Site Name	Unified AP Switch Controller	Name of the site in which the devices managed by Aruba Central are installed.
MAC Address	Unified AP Switch Controller	MAC address of the client.
Hostname	Unified AP Controller	Host name of the client.
User Name	Unified AP Switch Controller	Username of the client.
Key Management	Unified AP	Security mode used by the client.
Authentication	Unified AP	Authentication type.
IPV6 Address	Unified AP	IPv6 address of the client.
Capabilities	Unified AP	Client capabilities.
Usage	Unified AP Switch Controller	Total data usage for the selected time period.
OS	Unified AP Controller	Operating system of the client.
Last Seen Time	Unified AP Switch Controller	Date and time at which the client was last seen.
Connected Since	Unified AP Switch Controller	Date and time since when the client was connected.
AP Name	Unified AP	Name of the Instant AP.
AP Mac Address	Unified AP	MAC address of the Instant AP.
Channel/Band	Unified AP	Last connected channel and bandBand refers to a specified range of frequencies of electromagnetic radiation..
Switch Name	Unified Switch	Name of the switch.
Port	Unified Switch Controller	Port number of the switch.
Controller Name	Unified Controller	Name of the Aruba Controller.

/*]]>*/

Send Feedback